Parts For Sale

1982 Seca Turbo Turbocharger And More For Sale

feeds@yuku.com (CarlosK) — Sat, 31 Oct 2009 11:26:51 GMT

Hey guys I am back. My bike has run so well I am clearing my storage of 1982 Seca Turbo parts.

I have a turbocharger for sale.

I have two parts bikes and willing to sell parts off either. Everything must go. For those of you that do not know me, you can run a search here for my name and find I was an active user about a year ago. If you look up my old posts you will find I had been restoring two bikes. One I...

'82 SECA Turbo parts sale

feeds@yuku.com (BukOfMuk07) — Fri, 17 Jul 2009 07:46:51 GMT

Hi all,

Below please find posts of parts that I have for sale. If you need something that isn't listed, do not hesitate to ask...

Bike garaged until 2001 when bought by me at 13,400 miles from the original owner, covered for the next 2 years by me, in weather until 2007, storage unit since then.
Bike had 19,800 miles when 'retired' for parts.

I've checked over for defects(weeding out anything questionable), and cleaned up all parts before...

Honda 500 turbo parts

feeds@yuku.com (bimotayb8) — Wed, 27 May 2009 15:24:37 GMT

I have a few 500 Turbo parts that I just found. A very nice Turbocharger,rectifier,and the whole harness,some kind of metal tank[boost,vacuum?],sensors etc,e-mail or call me if you need anything, Bill,607-591-9643.

Seca turbo xj650 parts for sale.

feeds@yuku.com (westfieldturbo) — Sat, 28 Mar 2009 11:37:57 GMT

Hi, I am parting out a 83 XJ650 turbo. I have most all the parts so if anyone needs anything I will be glad to send some pictures. Thanks

Brad Taylor
browningbradtaylor@yahoo.com

Seca turbo oil check valve

feeds@yuku.com (Bearcat) — Fri, 13 Mar 2009 06:06:57 GMT

Does any one have a good non leaking oil check valve for my 82 Seca Turbo? I have tried to clean mine several times with out success,the rubber seat inside seems to be deteriated beyond repair!If anyone knows of a repair or replacement for same please let me know.....Thanks......Arnold

TC03-06a Turbocharger for sale

feeds@yuku.com (PositivePressure) — Wed, 11 Feb 2009 15:32:43 GMT

Excellent condition recently freshened TC03-06a turbocharger for Seca Turbo. $235.00 + shipping.

Offering it here first.

USA Shipping in Flat Rate box $14.00.
Elsewhere contact me for shipping cost.

Thx,

Mike

Seca Turbo Carb Slides with Diaphragms

feeds@yuku.com (PositivePressure) — Wed, 11 Feb 2009 15:28:50 GMT

Carb slides and diaphragms for Seca Turbo. Excellent condition. $40 USD for all 4.

$5.00 USPS Priority Mail in the USA.
Elsewhere contact me for shipping cost.

Thx,
-Mike

AGV TiTech "Industriale" Very Rare - Very Cool!

feeds@yuku.com (bernie) — Wed, 28 Jan 2009 16:56:55 GMT

This is an Industriale that I have worn maybe 3 or 4 times. No damage, no scratches. Even the visor is mint.

It is a Carbon Fiber / Kevlar helmet that has a satin finish only so you can see the helmets construction. Every one is different and unique.

Size is XL which is more like a Large in most helmets. The TiTech has a snug fit.

Asking 350.00

Chassis for 1983 yamaha seca turbo, with title needed.

feeds@yuku.com (westfieldturbo) — Wed, 22 Oct 2008 18:34:34 GMT

I bought a 1983 seca turbo in NC without the title. I am restoring it and just using it for a project bike however I cannot tag it unless i have the title. Please some one who knows anything about getting a title reply. Being the situation I am now looking for a chassis with a title. Please contact my if anyone has any ideas.

'82 SECA Turbo Carcass, or parts for sale -correction from '83 to '82...sorry, typo-

feeds@yuku.com (BukOfMuk07) — Sat, 18 Oct 2008 12:25:52 GMT

For sale :

- One carcass of '82 SECA Turbo. Without plastics. Has been hit by a F150 (at like 6 mph) broadside. The damage was as follows : frame bent (just enough to see, which is enough for me), *correction stator ignition cover smashed, handlebar bent down, muffler pushed in. Everything else (drivetrain) is fine, and was running like a champ right before the accident.

-...

CX500T Throttle Body & Fuel injectors

feeds@yuku.com (whizzer) — Tue, 19 Aug 2008 15:14:03 GMT

http://myworld.ebay.com/ebaymotors/loperavoce/

9.99 - No reserve

1983 seca 650 turbo part out and Canadian Cluster

feeds@yuku.com (FrankP) — Thu, 07 Aug 2008 03:54:34 GMT

I thought for a while that I might make it run and title this thing but it looks like I need the money a bit more now. I have a nearly complete 1983 Seca 650 turbo and a hard to find Canadian cluster. I am keeping the turbo, fuel tank and coils for my 82 otherwise I think I have most everything off the 83 still around. The plastics are hit and miss some are decent others are not. Prices will be determined by curent Ebay auctions and I will try to discount a little from that or you can make an...

82 SECA TURBO PARTS CHEAP

feeds@yuku.com (DForce5) — Sun, 03 Aug 2008 20:22:18 GMT

Hello again here are most of the parts that I have remaining from my part out, I'm letting this stuff go pretty cheap. all items are OBO!! Unless marked otherwise.

Seca Turbo part needed

feeds@yuku.com (jeffstjohn) — Fri, 16 May 2008 14:02:05 GMT

Does anyone have a cold start plunger for sale...I just need the one. 1982 XJ650LJ

cx500T camshaft $100

feeds@yuku.com (nikdanjon1) — Wed, 09 Apr 2008 14:36:26 GMT

This is LIKE NEW -- a cx500T camshaft. no pits on the lobes. GREAT shape. $100 plus $10 shipping to US. I will mail it international for correct postage.

tim

parting out 82 seca turbo

feeds@yuku.com (DForce5) — Wed, 26 Mar 2008 07:40:59 GMT

hello, I'm parting out my seca turbo that i bought as a project, not interested in it anymore. the carbs and turbo/exhaust except for the header pipes have already been sold. the gas tank is solid but has rust inside, the seat has some seam tears, the fairings are scratched and some have cracks but could be repairable. look at the pics and make offers. If you don't see what your looking for in the pics let me know and I'll check. Again make offers I'm letting this stuff go...

SECA Turbo Front Brake Upgrade Kit

feeds@yuku.com (Buk Of Muk) — Mon, 10 Dec 2007 12:39:01 GMT

Hello all,

It sure is nice to be back on the forum again, unfortunately Im here to dish a few of the parts that were intended for my bike before it died.

So, whats up for sale is a complete front end upgrade kit. This consists of an R1 brake lever, brake lines (still connected and in-tact), master cylinder, and calipers... R1 front discs (6 bolt)... and milled aluminum conversion brackets and hardware as provided by Mike Oberle himself !

I havent got it all in front of...

1983 cx turbo motor 16 miles

feeds@yuku.com (jturner651) — Wed, 10 Oct 2007 05:08:13 GMT

Contact jturner651@aol.com or chieffraley1520@aol.com

Rethinking this project

feeds@yuku.com (CarlosK) — Wed, 08 Aug 2007 13:48:21 GMT

I am no longer parting out this bike.

1983 cx 650 16 miles

feeds@yuku.com (jturner651) — Tue, 10 Jul 2007 19:08:58 GMT

A freind of mine has the following parts for sale

Seat
Tank
Fairing broken
rear cowl scratced
rear fender
rear wheel
pipes
Front fender scratched
front rim
brakes
motor
radiator with fan

Contact chieffraley1520@aol.com