750 Turbo CD Parts List required

feeds@yuku.com (Turbo Racer Tim) — Sun, 08 Nov 2009 09:09:38 GMT

Hi , Just got a 750 Turbo , require parts already !!

Is theri a CD Parts list for the standard GPZ 750 engine and the4 Turbo version ??

Let me know , be pleased to purchass it
turbotim@btconnect.com

Dissapearing Honda Turbo Trick UKHTA TurboTim

feeds@yuku.com (Turbo Racer Tim) — Sun, 08 Nov 2009 09:04:41 GMT

http://ukhta.multiply.com/video/item/8/_Turbo_Tim_and_his_USA_Edition_Honda_CX_650_Turbo_Santa_Pod_National_Finals_2009

The Dissapearing Bike Trick : Santa Pod racway , UK Sept 2009

feeds@yuku.com (Turbo Racer Tim) — Sun, 08 Nov 2009 09:03:20 GMT

http://ukhta.multiply.com/video/item/8/_Turbo_Tim_and_his_USA_Edition_Honda_CX_650_Turbo_Santa_Pod_National_Finals_2009

Turbo Tim The Disapearing Bile Trick with a CX 650 Turbo

feeds@yuku.com (Turbo Racer Tim) — Sun, 08 Nov 2009 09:01:18 GMT

Venue Santa Pod Racway , UK TurboTim Chaitrman UKHTA
September 26th National Finals Drag Racing

http://ukhta.multiply.com/video/item/8/_Turbo_Tim_and_his_USA_Edition_Honda_CX_650_Turbo_Santa_Pod_National_Finals_2009

Have fun : Ride Them Dont Hide Them

CX 500 Turbos for Sale.

feeds@yuku.com (bolderc) — Thu, 05 Nov 2009 09:41:45 GMT

I have three CX 500's for sale. One is registered Non Op here in California with the two others being parts bikes and between the two another complete bike being possible. It's a project that I don't have time to complete and need the space. Best offer over $1000.00 will be considered. All have fairings and complete motor assemblies and computers, I even have paint for them.
Located near Placerville, California.
Contact Terry @ (530)344-1581 or

Oil leaking into turbo

feeds@yuku.com (egagnon3) — Thu, 05 Nov 2009 09:05:07 GMT

Hey guys,

I got the bike running, and man I can feel the turbo in first gear, it flys to about 60mph, then it stops. Even when I shift it won't go any higher than about 60~70 mph. I removed the internals of the fuel check valve, got a new air filter, replaced the plugs and gapped them to .026". The old plugs were white and chalky, indicating the bike is running lean, I think. The bike also seems to have oil coming from the turbo into the intake. The wastegate is blocked...

Drip, drip, drip...

feeds@yuku.com (PositivePressure) — Wed, 04 Nov 2009 09:29:11 GMT

Most of you are familiar with the failing oil feed line check valve. After many inspections I believe I have finally determined the cause.

The valve is a simple ball check. What is not so simple is the molded rubber seal inside. When that seal deteriorates no amount of cleaning will make it work again. The seal can crack, flake, or separate from the check valve body. The familiar drip follows.

Not being one to identify a problem without offering a solution I do have a...

what are the 2 wires on the 650 ignition box? please help.

feeds@yuku.com (maximturbo) — Mon, 02 Nov 2009 10:51:01 GMT

hi guys,

got a turbo 650 ignition.
there is 2 wires that are not part of the 2 main big connectors and i'm not sure what they are.
there is a very short pink one about an inch long with a single female connector on it,
and a black with white stripe with a single connector on it, the same length as the main 2 big connectors.

i have a wiring diagram that was scaned but i cant make out all the colors.
im guessing 1 is for the sidestand (which i dont...

Hey guys I am back with deals on parts

feeds@yuku.com (CarlosK) — Sat, 31 Oct 2009 11:29:17 GMT

Hey guys I am back. My bike has run so well I am clearing my storage of 1982 Seca Turbo parts.

I have a turbocharger for sale.

I have two parts bikes and willing to sell parts off either. Everything must go. For those of you that do not know me, you can run a search here for my name and find I was an active user about a year ago. If you look up my old posts you will find I had been restoring two bikes. One I...

1982 Seca Turbo Turbocharger And More For Sale

feeds@yuku.com (CarlosK) — Sat, 31 Oct 2009 11:26:51 GMT

New with exhaust ?

feeds@yuku.com (baldguy) — Sat, 31 Oct 2009 03:41:25 GMT

I have a 82 I bought a while back and just starting on it.I am trying to take off the exhaust on the left side.The bolts are seized on the turbo can I heat them up to get them lose with out hurting the turbo.Thanks

Website Links Page Update

feeds@yuku.com (rhmiller) — Fri, 30 Oct 2009 08:49:37 GMT

I'm updating the website links page. Please forward any member, vendor, or turbo club websites. Thanks.

New owner, please help

feeds@yuku.com (egagnon3) — Thu, 29 Oct 2009 19:43:58 GMT

Hey guys,

I've been reading many of the previous posts and learned alot. The problem that I'm having is I recently got a '82 model, and not sure how it should be running. The problems i'm having are as follows: there is oil residue all inside the intake, boost gage stays in the "blue", there is a small exhuast leak past the wastegate, the bike drips oil out of the turbo after running, and the turbo doesn't seem to spin at idle, the bike won't...

MOTOR/TURBO/ BLACK BOX/ EXHAUST all 0 miles

feeds@yuku.com (louis) — Mon, 26 Oct 2009 12:45:51 GMT

What I have here is a complete CX 650T motor (everything on motor including turbo) also comes complete with wire harness and the main black brain box. This is a 0 mile motor and never has been opened. Also have the complete original pipes. I am selling all of it as a package. I will not separate. These are the only parts I have. Email me at usedcbxparts@hotmail.com The price for everything is $5,000 firm.

MOTOR FOR SALE

feeds@yuku.com (louis) — Mon, 26 Oct 2009 12:42:36 GMT

What I have here is a complete motor CX650 TURBO(everything on motor including turbo) also comes complete with wire harness and the main black brain box. This is a 0 mile motor and never has been opened. Also have the complete original pipes. I am selling all of it as a package. I will not separate. These are the only parts I have. Email me at usedcbxparts@hotmail.com The price for everything is $5,000 firm.

Does anyone have a lens?

feeds@yuku.com (monkeys turbo) — Wed, 21 Oct 2009 13:15:52 GMT

I need the front right turn signal lens for a 1982 seca turbo. have not been able to find one anywhere. Does anyone make reproduce them?

Turn signal lens for a Seca Turbo

feeds@yuku.com (monkeys turbo) — Wed, 21 Oct 2009 13:11:53 GMT

Hello I am looking for a right front turn signal lens for a 1982 Yamaha Seca Turbo.
thanks justin

Bob Cambrisgeshire England

feeds@yuku.com (bobdewdney) — Sun, 18 Oct 2009 07:11:39 GMT

Hi,

Does anybody know if the Honda Prelude SI fuel pump is ok for a CXT500? If not, can anyone recommend a replacement pump?

Thanks.

Kawasaki GPZ Turbo

feeds@yuku.com (pennsafety) — Mon, 12 Oct 2009 04:10:02 GMT

w/5300original miles.
I owner.... Whats it worth?

Turbo Meeting Germany in May 2010 (near Nuerburgring)

feeds@yuku.com (Theo CH) — Wed, 07 Oct 2009 12:53:28 GMT

Hi,

the next german Turbo- meeting will be on 28/30 May 2010.

Link: http://www.750turbo.info/index.php?view=cms_109

and: http://koblenz-net.de/~horn/2010_turbot ... glish.html

A lot of nice people will be there (me too)

on the road

Theo

TMIOA